simgolo.gif (10906 bytes)

 

BOTTLED WATER DISPENSING SYSTEM

DispensingSystem.GIF (73105 bytes)

How the system works.   The FLOJET Bottled Water Dispensing System was designed to pump water from a commercially available 5-gallon water bottle.  The system will deliver the water under pressure to a sink mounted individual drinking water faucet, or to the water inlet of a refrigerator for the icemaker and chilled drinking water tap.

When the suction wand is inserted into the 5-gallon bottle, it will activate the float switch on the end of the wand and turn on the pump.  This same float switch shuts off the system when the bottle is empty.  The wand has a built in back-flow preventor valve that prevents water in the system from flowing back into the bottle, or spilling while changing bottles.

The heart of the system is the pump module that automatically adjusts the flow and pressure to fill an icemaker or dispense chilled water from a refrigerator door tap, and stops when the icemaker is full or the water valve is closed.

HowSystemWorks.GIF (40280 bytes)